即时比分网

Welcome to [Wuxi Yijin Machinery Co., Ltd.] official website!
Centrifugal fan 4-79

Position: 即时比分网 > Centrifugal fan 4-79

  • 4-79C centrifugal fan

    4-79C centrifugal fan

    Click on the picture for details

  • 4-79C centrifugal fan

    4-79C centrifugal fan

    Click on the picture for details

  • 4-79C centrifugal fan

    4-79C centrifugal fan

    Click on the picture for details

  • 4-79C centrifugal fan

    4-79C centrifugal fan

    Click on the picture for details

  • 4-79C centrifugal fan

    4-79C centrifugal fan

    Click on the picture for details

  • 4-79C centrifugal fan

    4-79C centrifugal fan

    Click on the picture for details

4-79 centrifugal fan is a kind of complex structure equipment. It can be debugged according to different effects during the process of use. Different centrifugal fan prices and different adjustment methods make this fan also work effectively. Will make a difference. If you want to debug the centrifugal fan to a large state, you can start from various aspects. The manufacturer of Wuxi centrifugal fan is described as follows:
First, the centrifugal fan can be started at full pressure or reduced pressure, but when using full pressure to start, you must ensure that the power grid has sufficient capacity. Because the current at full voltage start is five to seven times the rated current, if the capacity of the power grid is insufficient, the form of reduced voltage start is used. This is an important aspect, if full-voltage starting is used when the power grid is not sufficient, a circuit fault will definitely occur.
Second, when the centrifugal fan is used in the test run, be sure to read the product manual carefully, especially check the circuit. Because when the centrifugal fan is used in the field of commissioning, if a fault occurs in the circuit, it will directly cause the failure of the fan.
Third, the centrifugal fan must not be less than two people in the test run. One person is controlling the power supply, and one person is observing the operation of the fan. If an abnormal situation occurs during the operation of the centrifugal fan, the fan must be stopped in time. Then check whether the data of the fan in all aspects is normal. After the check is completed, it takes less than five minutes to start again.
Fourth, even if the centrifugal fan is running normally, it should also measure whether the fan input current is normal. If the test current exceeds the rated current, stop the machine even if the fan is running, and then measure all data. Because there is definitely a reason to exceed the rated current, it may affect the use of the fan.
Expand and